Thursday, June 10, 2010

information on rubber

So I have been researching on the materials that balloons are made of. It's actually quite difficult to find information. But this is what I have so far - taken from: http://www.sciencebuddies.org/science-fair-projects/project_ideas/ApMech_p026.shtml

All matter is made up of atoms, like carbon, or hydrogen, or oxygen. Atoms are linked together to form larger compounds called molecules. Some molecules are made by stringing together repeated subunits. Such molecules are called polymers. In some polymers, including many synthetic polymers in textiles and plastics, the subunits are identical. In other polymers, such as proteins manufactured inside cells, the subunits have a common 'backbone' structure, to which different chemical groups are attached.

Rubber is an example of a natural polymer. The chains of molecules in rubber have a natural elasticity: they can stretch when pulled. When the pulling force is removed, the elastic polymers in rubber spring back to their original length. A polymer with elastic properties like this is sometimes called an elastomer. The molecular chains of an elastomer basically act like springs.

Solid materials generally expand when heated and contract when cooled.

Wednesday, June 9, 2010

Experiment - Take 1

So I have attempted my experiment, and it somewhat failed. But I have learnt many mistakes from this experience, so I'm hoping to reattempt this failure, and hopefully come up with better results. Right now, I want to focus on changing my method A LOT and doing some more research... this time focusing on latex (which btw is REALLY hard to find information on). Did you know that balloons are made of natural rubber latex? Well neither did I.

Monday, May 24, 2010

PROGRESS AT LAST!

So guess what?? Yesterday, while at Woolies, Lucy has actually taken her very first step in her experiment. Lucy has bought the balloons! Yay. Now, she just has to start the experiment.... =]

Thursday, May 13, 2010

METHOD! (3)

Sorry... I've decided to modify the end of my method a little.

Method
  1. Obtain four balloons of equal size, shape and colour.
  2. Inflate all balloons to approximately the same size (diameter of 40 cm). Use a measuring tape to ensure the diameter is approximately 40 cm for each balloon.
  3. Place the first balloon in the refrigerator at 0°C and leave it for three hours. Make sure the refrigerator door remains shut for all three hours, to restrict the amount of warm air flowing inside.
  4. Place the second balloon in a heated room at 25°C for three hours. Ensure that all doors and windows are shut at all times, to control the amount of cool air flowing inside the room.
  5. Tie the third balloon to a fan and leave the fan on for three hours.
  6. Place the fourth balloon in a bucket, with a constant stream of water above it, and leave this for three hours also.
  7. Retrieve all the balloons from their respective places after three hours, and observe any changes i.e. difference in size, shape, rate of deflation.
  8. Record all observations.
  9. Repeat steps 1-8.
  10. Obtain a white balloon and a black balloon.
  11. Place both balloons under direct sunlight for ten hours. Ensure that they, as much as possible, stay in the sun, and do not become shaded.
  12. Collect both balloons after ten hours and observe any changes i.e. size and shape.
  13. Record all observations.
  14. Repeat steps 10-13.

METHOD! (2)

So... I've decided to change my method... already!! I'm just gonna add a little bit onto the end...

Method
  1. Obtain four balloons of equal size, shape and colour.
  2. Inflate all balloons to approximately the same size (diameter of 40 cm). Use a measuring tape to ensure the diameter is approximately 40 cm for each balloon.
  3. Place the first balloon in the refrigerator at 0°C and leave it for three hours. Make sure the refrigerator door remains shut for all three hours, to restrict the amount of warm air flowing inside.
  4. Place the second balloon in a heated room at 25°C for three hours. Ensure that all doors and windows are shut at all times, to control the amount of cool air flowing inside the room.
  5. Tie the third balloon to a fan and leave the fan on for three hours.
  6. Place the fourth balloon in a bucket, with a constant stream of water above it, and leave this for three hours also.
  7. Retrieve all the balloons from their respective places after three hours, and observe any changes i.e. difference in size, shape, rate of deflation.
  8. Record all observations.
  9. Repeat steps 1-8.
  10. Obtain a white balloon and a black balloon.
  11. Place both balloons under direct sunlight for three hours. Ensure that they stay in the sun, and do not become shaded.
  12. Collect both balloons after three hours and observe any changes i.e. size and shape.
  13. Record all observations.
  14. Repeat steps 10-13.

METHOD!

I might change my method slightly later on, but this is what I have now:

Method
  1. Obtain four balloons of equal size, shape and colour.
  2. Inflate all balloons to approximately the same size (diameter of 40 cm). Use a measuring tape to ensure the diameter is approximately 40 cm for each balloon.
  3. Place the first balloon in the refrigerator at 0°C and leave it for three hours. Make sure the refrigerator door remains shut for all three hours, to restrict the amount of warm air flowing inside.
  4. Place the second balloon in a heated room at 25°C for three hours. Ensure that all doors and windows are shut at all times, to control the amount of cool air flowing inside the room.
  5. Tie the third balloon to a fan and leave the fan on for three hours.
  6. Place the fourth balloon in a bucket, with a constant stream of water above it, and leave this for three hours also.
  7. Retrieve all the balloons from their respective places after three hours, and observe any changes i.e. difference in size, shape, rate of deflation.
  8. Record all observations.
  9. Repeat steps 1-8.

Wednesday, May 12, 2010

climate Graph =] (3)


sooo.... i redid my climate graph this morning. I changed the right hand side axis so it just took up the top bit. =]
hope you like